It’s quite possible some config needs to be done on the raid controller for it to see the disk. Sometimes you can use lsmod to try and backtrack what is using the module. Please visit this page to clear all LQ-related cookies. To blacklist a module and thus preventing the loading during bootup use this command: Home Questions Tags Users Unanswered. How to set up a blacklist for insmod?
|Date Added:||22 May 2010|
|File Size:||66.94 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Here is mopdrobe lspci output: The T60p resumes properly with 2. You’re missing a link to the page in question, but even without that link I can tell you that the page is simply telling you to run modprobe v4l2loopback. The straightforward option is to build that into the kernel, i.
What does ‘Invalid module format’ mean? Meaning that debian based OS will not detect it.
Linux: Adjust storage kernel module load order ·
And also many hypervisors. Where does modprobe load a driver that udev requests? Either it never was, or it has been corrupted, or possibly it is for an architecture other than the one you have 32 vs 64 bit.
Post as a guest Name.
Check if the disk is already mounted by running “mount”. Here is the lspci output:.
If you do need it only use it on the last command. To apply the patch, run “patch -i FILE. As a result, the machine hangs upon the first disk access after resume. If it is not visible at this point, you can also do this to force a re-scan: Retrieved from ” https: The following lists these problems and known workarounds.
Linux: Adjust storage kernel module load order
So that i wll have a thin uImage. I ended up rebooting the server. In my case it was the necessary to add the new disk back into the raid.
Gilles k Eric Hammond 4. This requires kernel 2. Home Questions Tags Satq Unanswered. TCB13 4 Unless the disk is one of the few approved disks listed inside the BIOS, you will get an BIOS error during system boot, and the disk may operate unreliably. In perhaps a dozen cases, we’ve been forced to reboot servers because hot swap hasn’t “just worked.
If you want to be able to unload it, you will have to compile a new kernel and have it built as a dynamically un loadable ssta instead.