DELL GX270 LAN CARD DRIVER

Your Dell computer uses only PCI slots. Some network adapters automatically start the computer when they are connected to a network. Do not route card cables over or behind the cards. If you need a filler bracket, contact Dell. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.

Uploader: Bale
Date Added: 4 October 2014
File Size: 69.70 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 83611
Price: Free* [*Free Regsitration Required]

Your Dell computer uses only PCI slots. Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer.

If the card is full-length, insert the end of the card into the card guide bracket as you lower the card toward its connector on the system board. Lah cards are not supported. To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. To disconnect a network cable, first unplug the cable from your computer and then unplug it from xg270 network wall jack.

Before you begin any of the procedures in this section, follow the steps in ” Safety Instructions. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards.

Last Drivers  SIERRA WIRELESS AIRCARD 875 DRIVER

Download drivers for Dell Computer Corporation OptiPlex GX270

If necessary, disconnect any cables connected to the card. Lxn network adapters automatically start the computer when they are connected to a network. If a setup password has been assigned by someone else, contact your network administrator for information on resetting the chassis intrusion detector.

Do not route card cables over or behind the cards.

PCI Cards and Serial Port Adapters: Dell OptiPlex GX Systems User’s Guide

drll See the documentation for the card for information about the card’s cable connections. To connect a network cable, first plug the cable into the network wall jack, and then plug it into the computer.

See the documentation that came with the card for information on configuring the card, making internal connections, or otherwise customizing it for your computer.

Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.

To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. If you need a filler bracket, contact Dell. The brackets also keep dust and dirt out of your computer.

Last Drivers  DRIVER FOR HANNSPREE SN12E2

If you are installing or replacing a card, follow the procedures in the next section. After you open and close the cover, the chassis intrusion detector, if enabled, causes the following message to appear on the screen at the next computer start-up:. You can do so by touching an unpainted metal surface on the computer chassis. Insert the card firmly into the card connector on the system board.

Grasp the card by its top corners, tx270 ease it out of its connector. Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.