View All Video Cameras. Each of the PCBs used in the image processing system has the following functions: F 8 Make the following selections to end the Service Support Tool: PCB [3] to- gether with the mounting base. Information Management Information Management.

Uploader: Kagarn
Date Added: 5 November 2005
File Size: 35.78 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 67152
Price: Free* [*Free Regsitration Required]

Page 5 Replace the belt motor driver PCB.

Page Cassette 3 M Check the fixing assembly for a scratch and dirt. Page F 5 Remove ir850 2 thermistor retaining springs [1], and detach the main ther- mistor [2]. Range of adjustment 1 to 9; default: Page [1] is ON; after replacement, adjust the position of the drive lever using the screw [2] so that it is the same as it was before removal when the solenoid goes on.

imageRUNNER – Support – Download drivers, software and manuals – Canon Europe

Page 3 Remove the 2 screws [1], and detach the laser driver cooling fan [2]. Page CCD pixels, thereby ensuring a specific level of image density. F 4 Remove the E-ring [1], and remove the bearing [2] to detach the vertical path roller [3].

Last Drivers  TS-H653F DRIVER

Advice and guidance from print industry experts. Page 64 The reader controller PCB is connected with the main controller PCB by means of a communication cable inside the machine; as such, the reader unit may be connected using the same interface.

imageRUNNER 85

Remove the pickup assembly, and check the spring. This page requires Javascript. Used to enable the scanner to speed down and stop promptly, starting at the end of the image. Extensive range with quality and brightness.

Page 80 F 4 Peel off cnon Warning label [1] from the flexible cable [2]. F 5 Remove the screw [1], and detach the sub thermistor [2].

High quality printers and faxes for your business. Check the belt and the pulley. If you have replaced the charging wire. Connect the connector securely.

Page FM14 1: The combination of these output measurements is used to identify the size of the origi- nal.

Page 5 Try replacing the thermistor. Jam Sensors in the ADF iR pre-reversal pickup delay Code Sensor pre-reversal pickup stationary 1 pickup trailing edge skew Irr8500 Jams The discussions of paper jams that follow are arranged according to these locations. Photosensitive drum 6 Is there a scratch on the surface of the photosensitive drum? ON buffer path switch solenoid 1: Service Manual of the finisher.



Page 5 Does the problem occur only in copy images? To print the manual completely, please, download it. Help me choose Help me choose. The driver may be included in ir8050 OS or you may not need a driver.

Check the feeding fan to see if it operates.

Page 9 Remove the two springs [3] used to se- cure the cable in place. Page If the Fixing Web Is New Use the screw [2] to adjust the position of the solenoid [1] so that the travel of the drive lever is 8.